Skip to content
Snippets Groups Projects
Commit bfb744bd authored by George Oikonomou's avatar George Oikonomou
Browse files

Delete platform-specific border-router example (jn516x/tsch/simple-sensor-network/)

parent c98a8c06
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 0 additions and 374 deletions
examples/platform-specific/jn516x/tsch/simple-sensor-network/rpl-border-router/Makefile deleted 100644 → 0
+ 0
− 40
View file @ c98a8c06
CONTIKI_PROJECT=border-router
TARGET ?= jn516x
JN516x_WITH_DONGLE = 1
CONTIKI=../../../../../..
PROJECT_SOURCEFILES += slip-bridge.c slip.c
PROJECTDIRS += .. ../../tools
PROJECT_SOURCEFILES += rpl-tools.c
MAKE_MAC = MAKE_MAC_TSCH
MODULES += os/net/app-layer/coap
MODULES += os/services/orchestra os/lib/json
all: $(CONTIKI_PROJECT)
include $(CONTIKI)/Makefile.include
ifeq ($(PREFIX),)
PREFIX = bbbb::1/64
endif
#no flow control
connect-router: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -v1 -B 1000000 $(PREFIX)
#using XON/XOFF flow control
connect-router-sw: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -v1 -X -B 1000000 $(PREFIX)
#using hw flow control
connect-router-hw: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -v1 -H -B 1000000 $(PREFIX)
#using no flow control
connect-router-no: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -v1 -B 1000000 $(PREFIX)
connect-router-cooja: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 $(PREFIX)
examples/platform-specific/jn516x/tsch/simple-sensor-network/rpl-border-router/README.md deleted 100644 → 0
+ 0
− 2
View file @ c98a8c06
rpl-border-router has been configured and tested to run on a JN5168-dongle in combination
with the NXP IoT Gateway. This requires the baud rate to be configured on 230400Bd.
examples/platform-specific/jn516x/tsch/simple-sensor-network/rpl-border-router/border-router.c deleted 100644 → 0
+ 0
− 124
View file @ c98a8c06
/*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \file
* border-router
* \author
* Niclas Finne <nfi@sics.se>
* Joakim Eriksson <joakime@sics.se>
* Nicolas Tsiftes <nvt@sics.se>
*/
#include "contiki.h"
#include "contiki-lib.h"
#include "contiki-net.h"
#include "net/ipv6/uip.h"
#include "net/ipv6/uip-ds6.h"
#include "rpl.h"
#include "simple-udp.h"
#include "net/mac/tsch/tsch.h"
#include "net/mac/tsch/tsch-schedule.h"
#include "net/netstack.h"
#include "dev/slip.h"
#include "rpl-tools.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#define DEBUG DEBUG_NONE
#include "net/ipv6/uip-debug.h"
static uip_ipaddr_t prefix;
static uint8_t prefix_set;
PROCESS(border_router_process, "Border router process");
AUTOSTART_PROCESSES(&border_router_process);
/*---------------------------------------------------------------------------*/
void
request_prefix(void)
{
/* mess up uip_buf with a dirty request... */
uip_buf[0] = '?';
uip_buf[1] = 'P';
uip_len = 2;
slip_send();
uip_len = 0;
}
/*---------------------------------------------------------------------------*/
void
set_prefix_64(uip_ipaddr_t *prefix_64)
{
memcpy(&prefix, prefix_64, 16);
prefix_set = 1;
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(border_router_process, ev, data)
{
static struct etimer et;
PROCESS_BEGIN();
/* While waiting for the prefix to be sent through the SLIP connection, the future
* border router can join an existing DAG as a parent or child, or acquire a default
* router that will later take precedence over the SLIP fallback interface.
* Prevent that by turning the radio off until we are initialized as a DAG root.
*/
prefix_set = 0;
PROCESS_PAUSE();
PRINTF("RPL-Border router started\n");
/* Request prefix until it has been received */
while(!prefix_set) {
etimer_set(&et, CLOCK_SECOND);
request_prefix();
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
PRINTF("Waiting for prefix\n");
}
PRINTF("Obtained prefix: ");
uip_debug_ipaddr_print(&prefix);
PRINTF("\n");
rpl_tools_init(&prefix);
etimer_set(&et, CLOCK_SECOND * 60);
while(1) {
print_network_status();
PROCESS_YIELD_UNTIL(etimer_expired(&et));
etimer_reset(&et);
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
examples/platform-specific/jn516x/tsch/simple-sensor-network/rpl-border-router/project-conf.h deleted 100644 → 0
+ 0
− 47
View file @ c98a8c06
/*
* Copyright (c) 2010, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#ifndef BR_PROJECT_ROUTER_CONF_H_
#define BR_PROJECT_ROUTER_CONF_H_
#ifndef UIP_FALLBACK_INTERFACE
#define UIP_FALLBACK_INTERFACE rpl_interface
#endif
#define UIP_CONF_TCP 0
/* Needed for slip-bridge */
#define SLIP_BRIDGE_CONF_NO_PUTCHAR 0
#define UART_BAUD_RATE UART_RATE_230400
#include "../../common-conf.h"
#endif /* PROJECT_ROUTER_CONF_H_ */
examples/platform-specific/jn516x/tsch/simple-sensor-network/rpl-border-router/slip-bridge.c deleted 100644 → 0
+ 0
− 160
View file @ c98a8c06
/*
* Copyright (c) 2010, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \file
* Slip fallback interface
* \author
* Niclas Finne <nfi@sics.se>
* Joakim Eriksson <joakime@sics.se>
* Joel Hoglund <joel@sics.se>
* Nicolas Tsiftes <nvt@sics.se>
*/
#include "net/ipv6/uip.h"
#include "net/ipv6/uip-ds6.h"
#include "dev/slip.h"
#if CONTIKI_TARGET_JN516X
#include "dev/uart0.h"
#else
#include "dev/uart1.h"
#endif
#include <string.h>
#define UIP_IP_BUF ((struct uip_ip_hdr *)&uip_buf[UIP_LLH_LEN])
#define DEBUG DEBUG_NONE
#include "net/ipv6/uip-debug.h"
void set_prefix_64(uip_ipaddr_t *);
static uip_ipaddr_t last_sender;
/*---------------------------------------------------------------------------*/
static void
slip_input_callback(void)
{
PRINTF("SIN: %u\n", uip_len);
if(uip_buf[0] == '!') {
PRINTF("Got configuration message of type %c\n", uip_buf[1]);
uip_len = 0;
if(uip_buf[1] == 'P') {
uip_ipaddr_t prefix;
/* Here we set a prefix !!! */
memset(&prefix, 0, 16);
memcpy(&prefix, &uip_buf[2], 8);
PRINTF("Setting prefix ");
PRINT6ADDR(&prefix);
PRINTF("\n");
set_prefix_64(&prefix);
}
} else if (uip_buf[0] == '?') {
PRINTF("Got request message of type %c\n", uip_buf[1]);
if(uip_buf[1] == 'M') {
char* hexchar = "0123456789abcdef";
int j;
/* this is just a test so far... just to see if it works */
uip_buf[0] = '!';
for(j = 0; j < 8; j++) {
uip_buf[2 + j * 2] = hexchar[uip_lladdr.addr[j] >> 4];
uip_buf[3 + j * 2] = hexchar[uip_lladdr.addr[j] & 15];
}
uip_len = 18;
slip_send();
}
uip_len = 0;
}
/* Save the last sender received over SLIP to avoid bouncing the
packet back if no route is found */
uip_ipaddr_copy(&last_sender, &UIP_IP_BUF->srcipaddr);
}
/*---------------------------------------------------------------------------*/
static void
init(void)
{
slip_arch_init();
process_start(&slip_process, NULL);
slip_set_input_callback(slip_input_callback);
}
/*---------------------------------------------------------------------------*/
static int
output(void)
{
if(uip_ipaddr_cmp(&last_sender, &UIP_IP_BUF->srcipaddr)) {
/* Do not bounce packets back over SLIP if the packet was received
over SLIP */
PRINTF("slip-bridge: Destination off-link but no route src=");
PRINT6ADDR(&UIP_IP_BUF->srcipaddr);
PRINTF(" dst=");
PRINT6ADDR(&UIP_IP_BUF->destipaddr);
PRINTF("\n");
} else {
PRINTF("SUT: %u\n", uip_len);
slip_send();
printf("\n");
}
return 0;
}
/*---------------------------------------------------------------------------*/
#if !SLIP_BRIDGE_CONF_NO_PUTCHAR
#undef putchar
int
putchar(int c)
{
#define SLIP_END 0300
static char debug_frame = 0;
if(!debug_frame) { /* Start of debug output */
slip_arch_writeb(SLIP_END);
slip_arch_writeb('\r'); /* Type debug line == '\r' */
debug_frame = 1;
}
/* Need to also print '\n' because for example COOJA will not show
any output before line end */
slip_arch_writeb((char)c);
/*
* Line buffered output, a newline marks the end of debug output and
* implicitly flushes debug output.
*/
if(c == '\n') {
slip_arch_writeb(SLIP_END);
debug_frame = 0;
}
return c;
}
#endif
/*---------------------------------------------------------------------------*/
const struct uip_fallback_interface rpl_interface = {
init, output
};
/*---------------------------------------------------------------------------*/
tests/03-compile-nxp-ports/Makefile
+ 0
− 1
View file @ bfb744bd
......@@ -11,7 +11,6 @@ platform-specific/jn516x/rpl/coap-dr1175-node/jn516x \
platform-specific/jn516x/rpl/coap-dr1199-node/jn516x \
platform-specific/jn516x/tsch/simple-sensor-network/node/jn516x \
platform-specific/jn516x/tsch/tx-power-verification/node/jn516x \
platform-specific/jn516x/tsch/simple-sensor-network/rpl-border-router/jn516x \
platform-specific/jn516x/tsch/tx-power-verification/rpl-border-router/jn516x \
platform-specific/jn516x/tsch/uart1-test-node/jn516x \
sensniff/jn516x \
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment