From 3a4c7d5dc43d5a751bef33b94b363cdbc02f246b Mon Sep 17 00:00:00 2001 From: Simon Duquennoy <simon.duquennoy@gmail.com> Date: Wed, 1 Nov 2017 09:26:11 +0100 Subject: [PATCH] Update native RPL border router readme --- examples/rpl-border-router/native/README.md | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/examples/rpl-border-router/native/README.md b/examples/rpl-border-router/native/README.md index 03174972f6..6d8ac38e11 100644 --- a/examples/rpl-border-router/native/README.md +++ b/examples/rpl-border-router/native/README.md @@ -1,5 +1,5 @@ This code connects a 802.15.4 radio over TTY with the full uIPv6 stack of -Contiki including 6LoWPAN and 802.15.4 framing / parsing. The native border +Contiki-NG including 6LoWPAN and 802.15.4 framing / parsing. The native border router also acts as a RPL Root and handles the routing and maintains the RPL network. Finally the native border router connects the full 6LoWPAN/RPL network to the host (linux/os-x) network stack making it possible for @@ -11,9 +11,9 @@ mote that is either directly USB/TTY connected, or is remote via a TCP connect. What's on the SLIP interface is really not Serial Line IP, but SLIP framed 15.4 packets. -The border router supports a number of commands on it's stdin. +The native border router supports a number of commands on its stdin. Each are prefixed by !: -* !G - global RPL repair root. +* !G - global RPL repair root * !M - set MAC address (if coming from RADIO, i.e. SLIP link) * !C - show channel (if coming from RADIO, i.e. SLIP link) * !D - sensor data received @@ -25,4 +25,3 @@ Queries are prefixed by ?: * ?C is used for requesting the currently used channel for the slip-radio. The response is !C with a channel number (from the slip-radio). * !C is used for setting the channel of the slip-radio (useful if the motes are using another channel than the one used in the slip-radio). - -- GitLab